Xylan ® Coatings, Anaheim CA, Crest Coating, Inc.

PRODUCT INFO Powder Coating SBS® Bakeware Coating Halo-Retro-Reflective Coatings Dupont Teflon® Coatings Whitford Xylan® Coatings PFA® Coatings Halar® Coatings Screen Printing and Pad Printing Fastener Coating Architectural Coatings

ISO 9000:2000
Compliant

All Categories > Powder Coating > Xylan® Coatings > Whitford Xylan® Coatings

Printable Page Email

Email This Page

Save To Favorites


	Whitford Xylan® Coatings

Email This Page

Save To Favorites

Whitford recognizes the importance of a properly engineered and applied coating system. A "Quality Approved Coater" program was established to provide industry competent sources to apply their products. Crest Coating is a charter member in this distinguished network.

Whitford Xylan® coatings have a broad range of properties which make them ideal for a variety of applications. Whitford Xylan® coatings differ from traditional fluoropolymer coatings in one very important aspect ... they are composite materials. Lubricants with the lowest-known coefficient of friction are combined with the newest high temperature resistant organic polymers to create Whitford Xylan® coatings.

larger image

larger image

Specifications · Types of Whitford Xylan® Coatings

Specifications

Outstanding Properties of Whitford Xylan®		Low coefficient of friction – as low as 0.02 Excellent wear resistance - even under extreme pressures Corrosion and weather protection against sunlight, saltwater, and harsh chemicals Xylan® offers a wide operating temperature range - -420F to +550F Wide array of colors to help color code your products Xylan® has excellent adhesion to a variety of substrates including most metals, plastics, ceramics and wood Pliability allowing Xylan® to bend freely and repeatedly without breaking Flexible curing schedule from ambient to 750F

Applicable Surfaces		Aluminum Brass Carbon Steel Fiberglass Glass Magnesium Plastics Rubber Stainless Steel Steel Alloys Wood

Coefficient of Friction		0.02 to 0.20

Use Temperature Range		-420ºF to 550ºF (-250ºC to 285ºC)

Pre-Treatment Process		Optimum adhesion is obtained by roughening the surface before applying the coating. Except where specifically mentioned, most Xylan® industrial coatings require a sandblast and primer coat.

Capabilities		See In-House Capabilities

Types of Whitford Xylan® Coatings

1000 Series		Premium dry-film lubricant, with widely varying properties; hard, heat stable, excellent broadband corrosion barrier; flexible cure schedule; can be formulated to have good release; electrical conductivity; fair UV stability. Applied by spraying. Typical applications include; sliding mechanisms, bearings, large fasteners, power screws, valves, machine parts, pistons.

1400 Series		Excellent chemical resistance, particularly to bases. Good UV stability. Applied by spraying. Typical applications include; large fasteners, automotive components.

1500 Series		Xylan 1500 coatings are decorative enamels with low-friction properties and stain resistance which can operate at elevated temperatures. Unlike many fluoropolymer finishes, coatings in this series may be produced in virtually any color.

8000 Series		Similar characteristics as the 1000 Series but utilizes materials approved by the FDA for food use. Typical applications include; warming plates, faucet valves, heating elements, ice makers, pans,toasters.

PFA Plus		Excellent chemical and temperature resistance as well as low friction properties. Applied by spraying. Typical applications include: plastic and urethane molds, bakery products, chemical storage tanks.

Whitford Xylan® Coatings

Outstanding Properties of Whitford Xylan®

Applicable Surfaces

Coefficient of Friction

Use Temperature Range

Pre-Treatment Process

Capabilities

1000 Series

1400 Series

1500 Series

8000 Series

PFA Plus